EN
Language
All categories
Product ID: 68455934
OEM Specification Intake Valve
Contact Now
Description
OEM Specification Intake Valve: Empowering the Auto Parts System, Safeguarding the Core Power of Engines
In the power cycle of heavy-duty engines such as the Cummins X15 and PACCAR MX-13, the intake process is a crucial starting point that determines combustion efficiency and power output. When engines operate under high loads for an extended period, intake valves are prone to issues like poor sealing and stuck opening/closing due to wear and carbon deposits.
These problems directly lead to insufficient air intake, imbalanced air-fuel mixture, and consequently, reduced power and soaring fuel consumption. However, the OEM Specification Intake Valve we offer, as one of the core Auto Parts, is manufactured in strict compliance with original factory design standards. It not only achieves precise compatibility with these two star engine models but also collaborates deeply with components such as the Crankshaft, Bump, Filter, Sensor, and Gear. This comprehensive collaboration activates the efficiency of the intake system and lays a solid foundation for the long-term stable operation of the engine.
From material selection to manufacturing processes, this OEM Specification Intake Valve replicates original factory standards: it adopts high-strength heat-resistant alloy sourced from the same supplier as the original, undergoes precision forging, multiple grinding processes, and surface nitriding treatment. The diameter tolerance of the valve stem is controlled within ±0.01mm, the surface roughness of the sealing face is as low as Ra0.4μm, and the fitting degree reaches over 99.9%. It can withstand high-temperature working conditions above 800℃ while exhibiting excellent wear resistance and corrosion resistance. In scenarios where the Cummins X15 delivers high power, the intake valve precisely controls the air intake volume, ensuring the combustion chamber receives an adequate air-fuel mixture and helping the engine continuously release strong torque during heavy-load climbing. For the PACCAR MX-13, which prioritizes fuel economy, its accurate opening and closing timing optimizes the air-fuel ratio, reducing unnecessary fuel consumption by up to 4% per 100 kilometers. This truly achieves the dual value of "original factory quality and high efficiency with energy savings".
As an important part of the Auto Parts system, the stable operation of the OEM Specification Intake Valve relies on the collaborative support of other core components. The Crankshaft, as the core of power transmission, provides a foundation for the precise opening and closing of the intake valve with its stable rotational speed. When the crankshaft drives the camshaft to operate at the rhythm set by the original factory, the intake valve can perfectly match the piston stroke, opening and closing at the optimal timing. This avoids premature or delayed intake caused by fluctuations in the crankshaft's rotational speed and ensures intake efficiency. The Bump (buffer component) absorbs vibration shocks during engine startup/shutdown and load changes, reducing rigid collisions between the intake valve and valve lifters/rockers. This prevents bending of the valve stem and damage to the sealing face, extends the service life of the intake valve, and ensures it maintains original factory-level performance during long-term use. The air Filter (a type of Filter) acts as a "frontline protective barrier" for the intake valve. It efficiently filters dust and particulate impurities in the air, preventing contaminants from adhering to the surface of the intake valve along with the air-fuel mixture and forming carbon deposits. This avoids valve sticking and poor sealing caused by carbon deposits, safeguarding the original factory-spec performance of the intake valve from the source.
Meanwhile, the Sensor provides real-time data support for the intelligent regulation of the OEM Specification Intake Valve. The intake pressure sensor and intake temperature sensor collect parameters of the intake system in real time and transmit the data to the ECU (Electronic Control Unit) quickly. Based on these parameters, the ECU dynamically adjusts the opening angle and duration of the intake valve. For example, when the sensor detects excessively high intake temperature, it can control the intake valve to close later, increasing the intake of cold air and preventing premature combustion of the air-fuel mixture. The crankshaft position sensor accurately captures the rotational speed signal of the crankshaft, providing a basis for the timing control of the intake valve and ensuring perfect synchronization between the intake process, combustion process, and exhaust process. The timing gear set in the Gear components features original factory-level tooth profile accuracy and meshing clearance, precisely transmitting the power of the camshaft. This avoids deviations in the opening and closing timing of the intake valve caused by gear wear, further enhancing the collaborative efficiency between the intake valve and the engine's power system and ensuring the advantages of the original factory specification run through the entire power cycle.
In practical application scenarios, the advantages of this OEM Specification Intake Valve are particularly prominent. For the PACCAR MX-13 engines in long-distance logistics fleets, after replacement, a more responsive acceleration can be clearly felt, and the fuel economy advantage remains stable during high-speed cruising, effectively reducing long-term operating costs. For the Cummins X15 engines in construction machinery, their original factory-level durability and compatibility enable them to easily cope with the harsh high-temperature and dusty environments on construction sites. This reduces equipment downtime for maintenance caused by intake valve failures and ensures the progress of construction projects.
Additionally, as a standardized Auto Part, it achieves 100% compatibility with original factory engines, requiring no additional modifications during installation. It also comes with an original factory-level warranty of up to 18 months, providing users with a "reliable quality and worry-free after-sales" experience.
From ensuring the original factory quality of a single component to empowering the Auto Parts system through collaboration, our OEM Specification Intake Valve is not only an "optimizer of intake efficiency" but also a "guardian of engine power". Together with components such as the Crankshaft, Bump, Filter, Sensor, and Gear, it builds an "efficient power ecosystem" for the engine. It not only solves the pain points of poor compatibility and unstable performance of ordinary intake valves but also provides original factory-level protection for the long-term stable operation of the two star engine models. Choosing this OEM Specification Intake Valve means choosing to safeguard the core performance of the engine with original factory quality, ensuring every operation combines power, energy efficiency, and reliability, and calmly coping with high-load challenges in fields such as logistics transportation and engineering construction.
You may also like
Contact Now
Please Send Message
${currentPro.title}