EN
Language
All categories
Product ID: 68628238
Low voltage draw-out switchgear
Contact Now
Description
MNS low-voltage withdrawable switchgear is a combination cabinet type assembled by factory using standard modules (FBA). This series of low-voltage withdrawable switchgear is suitable for power plants, substations, petrochemicals, metallurgical steel rolling, transportation and energy, light industry and textile enterprises, residential areas, high-rise buildings and other places. It is used for the conversion, distribution and control of electrical energy in power systems with AC 50-60HZ and rated working voltage of AC 660V and below.
Terms of Use
Surrounding air: The temperature should not exceed+40 ° C, not be lower than -5 ° C, and the average temperature within 24 hours should not exceed+35 ° C.
Atmospheric conditions: The air is clean, with a relative humidity not exceeding 50% at a maximum temperature of+40 ° C. Higher relative humidity is allowed at lower temperatures, such as 90% at+20 ° C, but temperature changes should be taken into account,
It is possible that condensation may occur accidentally.
The altitude shall not exceed 2000m.
If the above usage conditions cannot be met, it should be resolved through negotiation between the user and the manufacturer.
When this device is used on offshore oil drilling platforms and nuclear power plants, a separate technical agreement should be signed.
You may also like
Contact Now
Please Send Message
${currentPro.title}