Menu
Language
All categories
      Product ID: 62930679

      9V battery photoelectric stand alone smoke alarm

      Contact Now

      Description

      The product is photoelectric Smoke Alarm, it is generally more effective at detecting smoldering fires which smolder for hours before bursting into flame.Sources of it fires may include cigarettes burning in couches or bedding. It accords with the ISO/LPCB Standard.

      To insure your safety, you need install one alarm at least in your every single room. 


      How to test the Smoke Alarm:


      1) It is important to test this unit monthly to make sure it is working properly. Don’t use fire to test your alarms, press the test button on the cover of the unit until the alarm sounds. If it does not alarm, make sure that the unit is receiving power and test it again. If it still does not alarm, check your battery or replace it immediately.
      2) The signal flashes once every 30 seconds and while it alarms the signal will flash once 0.5 per second.
      3) If the alarm makes low “chirp” sounds about every 30 seconds, it tells you to exchange your battery.
      4) Little smoke will not cause alarms, so misinformation occurs only when you blow smoke to the alarms directly or you forget to turn on your ventilated facility while you are cooking.
      5) Sometimes when you smoke the unit will alarm, so you can just ventilate air to it to stop alarming.


      Standalone smoke detector installation

      The standalone smoke detector is generally installed on the ceiling of the protecting area, for the smoke in a fire is lighter than the air, so it is easier to float upwards. Installing the standalone smoke detector on the ceiling can help detect the smoke better.
      When installing, you should first fix the smoke detector base with screws, then rotate the standalone smoke detector into the base.


      Product Description

      •1 year battery life time
      •DC 9V battery operated
      •Photoelectric chamber of early detection from all   directions.
      •Loud>85db(A)alarm signal(3M)
      •Flash alarm indicator(red LED)
      •Test/Hush associative button
      •Low Battery signal
      •Replaceable battery 1Y/3Y/5Y
      • N.W.: ≈ 124g(include battery)
      • Dimensions: Ф100*37mm



      Product Parameter

      Model No. LZ-1901
      Standard EN14604:2005/AC:2008
      Voltage DC 9V
      Standby current 10uA
      Alarm current 30mA
      Sensor type Photoelectric
      Temperature 0°C~+40°C
      Ambient Humidity 95%R.H
      Alarm indication Red LED & Buzzer
      Sound pressure 85dB(around 3m)
      Weight 126g(incl.battery)
      Product size Φ100*37mm
      Installation way Ceiling mounting


      Applicable place

      Smoke Alarm Application Place

      Please Send Message

      ${currentPro.title}

      - Send