Central Asia O2O Exhibition and Trade Center

Language

All categories

Video

Product ID: 68928170

OEM PVC Waterstop USA Dumbbell Profile for Concrete Joints

Contact Now

Description

A leaking joint can cost a US tank project weeks of schedule. Our OEM PVC waterstop USA line ships CRD-C 572 tested strips that seal construction joints under sustained hydrostatic head. We extrude every profile in-house and cut it to your drawings — source factory pricing, no middleman.

What ships with every order:

Dumbbell, centerbulb, ribbed and keyway profiles, 4 to 12 inches wide
50 ft rolls plus factory-fabricated corners, tees and crosses
A batch mill test certificate covering tensile strength, elongation and hardness
Mixed-container loading with PVC waterproofing membrane and drainage products

Specifications Matched to US Project Specs

Parameter	Specification	Adapted for US Projects
Profile	Dumbbell, centerbulb, ribbed, keyway	Dumbbell for static construction joints, centerbulb for movement joints — the default pairing in ACI 350 and Corps of Engineers practice
Width × Thickness	4–12 in × 3/16–1/2 in	Imperial sizing to match US spec sheets; 6 in and 9 in are the most requested widths for tank work
Mechanical Properties	Tensile ≥15 MPa, elongation ≥300%, Shore A 65±5	Values reported per CRD-C 572 test methods, formatted for engineer submittal
Service Temperature	-30 °C to +60 °C	Keeps flexibility through northern freeze-thaw cycles and southern summer pours
Standard & Packing	CRD-C 572 methods; NSF/ANSI 61 compound on request; 50 ft rolls	NSF 61 compound for potable water tanks; roll length matches US site handling practic

Our most requested item for static tank joints is the 6 inch dumbbell PVC waterstop, stocked for repeat orders and quoted within one business day.

Where Our Waterstops Work Hardest in US Projects

✅ Wastewater treatment plants and equalization tanks — buyers: municipal EPC contractors, water authorities

Local pain point: joints that weep during the 24-hour hydrostatic test block acceptance and delay NPDES compliance.

Our advantage: engineered as a waterstop for leaking wastewater tank joints, the ribbed anchors lengthen the seepage path and hold under sustained head, while batch certificates support your acceptance file.

✅ Potable water reservoirs and storage tanks — buyers: tank builders, public works departments

Local pain point: regulators require potable-safe materials, and generic strips often fail documentation review.

Our advantage: NSF/ANSI 61 compliant compound available on request; the 6 inch dumbbell PVC waterstop serves static wall-to-slab joints, and centerbulb profiles cover zones with thermal movement.

✅ Tunnels, metros and deep foundations — buyers: underground contractors

Local pain point: high groundwater tables combined with continuous joint movement.

Our advantage: centerbulb profiles flex with joint opening and closure; combined with PVC waterproofing membrane they form the belt-and-suspenders system many US consultants specify below grade.

✅ Dams, spillways and canal structures — buyers: heavy civil contractors

Local pain point: freeze-thaw exposure plus large thermal movement across long structures.

Our advantage: centerbulb profiles are engineered to absorb repeated movement, and elastomeric recovery holds after compression cycles; lining sections can be consolidated with composite geomembrane in the same shipment.

✅ Site drainage and outfall connections — buyers: commercial developers, industrial park builders

Local pain point: seepage where structures meet drainage runs, discovered only after backfill.

Our advantage: the waterstop ties continuously into HDPE double wall corrugated pipe runs, so joint sealing and drainage come from one supplier with one QC file.

✅ Access roads and laydown areas around tank farms — buyers: industrial EPCs

Local pain point: subgrade softening beside water-retaining structures during wet seasons.

Our advantage: base reinforcement with plastic geogrid ships in the same container, cutting site coordination across two scopes.

waterstop for leaking wastewater tank joints

Profile selection, in short:

Static construction joint, little or no movement → dumbbell profile
Expansion joint with movement → centerbulb profile, bulb centered on the joint
Exterior retrofit over an existing joint → externally fixed profile with sealed splices

Case Study — Municipal Equalization Tank Retrofit, Texas

Project: 1.2-million-gallon equalization tank retrofit, Texas Gulf Coast

Buyer: a municipal water EPC contractor (previously sourcing strips through a regional distributor)

Problem: the first 24-hour full-head test recorded 31 of 180 m of wall-to-slab joints weeping. Acceptance was rejected, liquidated damages were accruing, and the contractor needed a proven waterstop for leaking wastewater tank joints without rebuilding the walls.

What we did:

Supplied 2,050 m of 6-inch centerbulb profile with 96 factory-fabricated corners, delivered in 18 days
Held a remote hot-air welding training session for the contractor's 5-person crew before the first splice

Before vs. after:

Metric	Before	After
Visible leaks at full-head test	31 joints weeping	0 recorded in the 24-hour test
Schedule position	Acceptance 19 days behind	Closed out 14 days ahead of the revised plan
Financial exposure	≈ $85,000 liquidated damages risk	Avoided
Repeat business	None	4,800 m follow-up orders across two further tanks

Why Choose Us

Factory depth, not trading. A 45,000 m² site with 30,000 m² of workshops, extrusion in-house, and 2023 sales of RMB 300 million. As a waterstop manufacturer we have supplied China Railway Group, CRCC and CCCC on rail, dam and metro projects since 2019 — export orders run on that same QC baseline.
Documentation discipline. ISO 9001 / 14001 / 18001 certified. Every container ships with a batch mill test certificate — tensile, elongation, hardness — formatted for US engineer submittal, so your approval file is complete on day one.

Customization

OEM to your drawings. Widths from 4 to 12 in, dumbbell, centerbulb, ribbed or keyway profiles, cut lengths, and factory-fabricated corners, tees and crosses. Sample ready in 7 days, MOQ from 500 m.
Consolidated container. Mix waterstop with PVC waterproofing membrane, composite geomembrane, HDPE double wall corrugated pipe and plastic geogrid in a single 20GP — one PO, one QC file, lower landed cost per project.

After-Sales Service

Technical support through your first pour. Joint detail review, hot-air welding procedure manual with video, and remote assistance during installation; our engineers respond within 24 hours.
Traceability and claims handling. Every roll carries a batch number; documented response within 24 hours, with replacement or remediation per contract terms when a shipment issue is confirmed. Most US buyers keep us as a standing supplier after the first project.

How to Order — First-Time Cooperation Flow

Inquiry — send profile, size, quantity and destination port
Quotation — pricing plus datasheet within 12 hours
Sample — confirm sample and test report for standard profiles
Contract — proforma invoice confirmed, 30% deposit
Production — batch QC during extrusion, mill test certificate issued
Delivery — balance against B/L copy; FOB, CIF or DDP terms available

First-time buyers typically complete steps 1–4 within one week.

FAQ

Q: What size waterstop do we need for a 10-foot-deep tank?

A: For static construction joints under roughly 3 m of head, a 6-inch dumbbell profile is the common choice, and the 6 inch dumbbell PVC waterstop covers it with margin. For deeper tanks, joints with movement, or higher heads, step up to 9–12 in widths or a centerbulb profile. Send your joint drawing and we will confirm the selection within one business day.

Q: How do you connect waterstop at corners without losing the seal?

A: Use factory-fabricated corners, tees and crosses for every intersection, so site crews only weld straight runs with a hot-air welding knife. We include fabrication drawings and a welding procedure guide with each order.

Q: What paperwork do US engineers usually ask for before approving a waterstop?

A: Typically a mill test certificate with tensile, elongation and hardness values, a compliance statement to CRD-C 572 test methods, and NSF/ANSI 61 documentation where the water is potable. We include all three in the submittal package.